I still havenot got, what part youre talking about. Is it steering damper? Or what exactly do you mean by "drain"?
Yes, this is the steering damper
I still havenot got, what part youre talking about. Is it steering damper? Or what exactly do you mean by "drain"?
Yes, this is the steering damper
I picked up the seals to fit. Established. All right
Guys, I'm looking for new seals for the damper. My oil seals are bad-a crack
Greetings to all. Disassembled the drain damper. It was completely dry. There was no oil inside. As it turned out, the oil seals were dry and cracked, and there was a crack in them. I have a question. What are the seals suitable for, or where can I buy them separately?
according to the repair manual the lenght of the spring should be 393mm incl. bushing - see attached file
according to the repair manual the lenght of the spring should be 393mm incl. bushing - see attached file
Thank you very much. Now I understand why I have a mot below. My springs are 370 mm.
Hi Alex
What do you mean with „size“? Dimension, lenghs, diameter or the spring rate?
It’s long, I’m curious to know if my springs sagged.
Hello! I am from Russia, therefore I have poor spelling. I have a question. I need to know the size of the new springs to see if my springs have slipped. I have a manual but it is on version R version but there springs are different. Can anyone share a link to the manual from version S 1190. Thank you very much
ok, somit hat sich der Scheinwerfer für mich erledigt. Die fehlende e Zulassung wäre mir persönlich wumpe, aber das man den Scheinwerfer nicht einstellen, ist Mist.
wäre an den Befestigungsschrauben der Lampe nicht möglich,zb ein langloch zu erstellen und somit den Scheinwerfer etwas zu verstellen ?
Nein, geht nicht.
. Ich habe dies für das Abblendlicht getan, ich habe 2 zusätzliche Löcher für die Montage gebohrt, damit der Scheinwerfer höher angehoben werden kann, also habe ich das Abblendlicht eingestellt, aber ich hatte ein Abblendlicht, es scheint nicht in den Himmel, es scheint nicht auf die Straße, weil ich das Ganze angehoben habe Faro. Daher musste ich den Scheinwerfer zerlegen und die Abblendlichtlinsen mit Standardcremes einstellen. So scheint meine Ferne jetzt auf der Straße.
Ich begrüße alle in diesem Forum! Gestern habe ich diesen Scheinwerfer auseinander genommen. Ich zerlegte den Scheinwerfer auf eigene Gefahr und Gefahr. Ich möchte sofort sagen, dass Klebstoff nicht auf Hitze reagiert, ein Ofen und ein Haartrockner helfen Ihnen nicht. Tatsächlich ist der Scheinwerfer nicht zusammenklappbar. Es gibt nur einen Ausweg: Schneiden Sie Plastikglas zwischen der Rückwand und dem Glas. Das Schneiden dauert sehr lange. Ich habe eine Stunde damit verbracht. Ich habe das Abblendlicht angehoben und jetzt ist alles perfekt für mich. Gerahmt 2 Unterlegscheiben unter jeder Linse.
Here, I show how the headlight shines. No filters or effects are applied to the photo.
Headlight shines better than 1290 sas
If the LED head lamp got no adjustment, so I mean the e-number is a fake.
No! Mattgeckoleds products original
I also found a difference in the navigation lights. When on the street light running lights light up very brightly. When the dipped headlights turn on darkly and the running lights shine 50% less.
Alles anzeigenHello, Alex,
That doesn't sound so good.
Is it no longer possible to adjust the headlight range with the headlight?
How far does the dipped beam shine?
Is the illuminated area brightly illuminated?
Hello! It is not possible to adjust the headlight in height. No adjustments! That is why I had to drill 2 holes to raise the headlamp higher. After 3 hours I will do the 1290SAS test.
Friends, I bought this headlight for my 2014. Immediately I want to ask the admins not to ban me. Because I am from Russia and I do not know the language well. I got a ban for 1 week almost nothing. And now about the headlights. the headlight shines very low - it is very dangerous. there are no adjustments on it. The headlamp shines 8 cm lower from the drain. I don’t know how Matt set it up there, but to go with such a low light is scary. I had to drill 2 holes and thread it the only way I solved this problem.
Sounds like 2014 ktm!