Hallo Freunde,
Habe festgestellt das meine 990SMR einen Neigungssensor hat. Den wollt ich eigentlich ausbauen/überbrücken.weis wer wie?
Parallel hab ich festgestellt das sie auch ohne den sensor anspringt.. kann das sein?
Danke für paar Tips
990 SMR Neigungssensor
-
- 990 SM
- eatvduke990
-
Hab ich aus dem AV Rider Forum,
I'll bet on the ECU not caring if the SIS is there or not.
I can help you with the Tip over switch. 0.4-1.4v on the Red/Orange wire will think the bike is upright. You need to put a 3.9K Ohm between the Dark Blue and the Red/Orange. Then an 800 Ohm between the Red/Orange and the Black. Very small current, so only milli-watt is needed.
The Dark Blue is Vcc, 5 Volts. The black is ground. The Red/Orange is the sense wire.
-
Alles anzeigen
Hab ich aus dem AV Rider Forum,
I'll bet on the ECU not caring if the SIS is there or not.
I can help you with the Tip over switch. 0.4-1.4v on the Red/Orange wire will think the bike is upright. You need to put a 3.9K Ohm between the Dark Blue and the Red/Orange. Then an 800 Ohm between the Red/Orange and the Black. Very small current, so only milli-watt is needed.
The Dark Blue is Vcc, 5 Volts. The black is ground. The Red/Orange is the sense wire.
danke achim! ich versuchs jetz mal ohne. vielleicht gehts ja so ;)
